Skip to content?



About TMS

3D Descriptions

BBFF3

Posted on: March 08 2008 by John Barry

3600’ Selectable 1, 2, or 3 kW

Network Fish Finders      
Turn your NavNet 3D display into a powerful, dual-frequency fish finder with one of our Network Sounders. They connect directly to your NavNet 3D display or an Ethernet hub with a single Ethernet cable. Also works with VX2.

Furuno’s new BBFF3 high power, network sounder is your key to finding more fish. This network fish finder connects directly to a NavNet display or an Ethernet hub with a single Ethernet cable. If it is connected to an Ethernet hub that has multiple displays attached, each of those displays will have access to the fish finder features.

The unit itself can be configured as a 1, 2 or 3 kW RMS output, dual frequency sounder. You may choose low frequency, high frequency or both at the touch of a key and obtain detailed echoes of bottom structure and fish using phased range scales up to 2,400 meters. It also utilizes Furuno’s Free Synthesizer (FFS) transceiver which means you can easily select from a broad range of frequencies.

The BBFF3 turns any NavNet display into one of the most powerful fish finders available on the market today. And because it is being used on a NavNet display, you can split the screen with other NavNet features like: Radar, Chart Plotter, NavData and even Video, depending on which NavNet unit you have.

DFF1

Posted on: March 08 2008 by John Barry

2500’ 50 & 200 kHz 600 W or 1 kW

Turn your NavNet 3D display into a powerful, dual-frequency fish finder with one of our Network Sounders. They connect directly to your NavNet 3D display or an Ethernet hub with a single Ethernet cable. Also used in VX2.

Furuno’s DFF1 is a new network sounder featuring Furuno Digital Filter (FDF) Technology designed for use with NavNet, NavNet vx2 and NavNet 3D. This new digital Network Sounder can turn any NavNet display into a powerful, dual-frequency digital fish finder. The compact network sounder unit connects directly to a NavNet display or an Ethernet hub with a single Ethernet cable. If it is connected to an Ethernet hub that has multiple displays attached, each of those displays will have access to the Network Sounder.

The sounder itself has a selectable 600W or 1kW output power. You may choose LF (50kHz), HF (200kHz) or both at the touch of a key and obtain detailed echoes of bottom structure and fish using range scales of up to 5,000 ft. And because the Network Sounder is used on a NavNet display, you will also be able to use its Radar and Chart Plotter features depending on which unit you have.

The DFF1 is a direct replacement for the BBFF1.

BBGPS

Posted on: March 08 2008 by John Barry

This self contained GPS Receiver is used for NavNet 3D and NavNet VX2 as well as any application where a NMEA 0183 Sensor is required

Receiver Type – GPS/WAAS

Displays – Utilizes Any NavNet Display

GPS/WAAS Receivers
NavNet 3D’s super sensitive 12-channel GPS receiver is integrated with WAAS technology to offer higher position accuracy. Simply plug it into a MFD display and it will share the GPS/WAAS position information across the entire network.

BBWGPS

Posted on: March 08 2008 by John Barry

This self contained GPS Receiver is used for NavNet 3D and NavNet VX2 as well as any application where a NMEA 0183 Sensor is required

Receiver Type – GPS/WAAS

Displays – Utilizes Any NavNet Display

GPS/WAAS Receivers
NavNet 3D’s super sensitive 12-channel GPS receiver is integrated with WAAS technology to offer higher position accuracy. Simply plug it into a MFD display and it will share the GPS/WAAS position information across the entire network.

DRS25A/6

Posted on: March 08 2008 by John Barry

The DRS25A incorporates a 25kW T/R and either 4’ or 6’ Open Array antenna.

6’ Open Array 96 n.m. 25 kW 1.2 degrees

Includes XN13A/6 a 6’ Open Array Antenna that has a horizontal beam width of 1.2

Includes the PSU0013 Power Supply Unit as standard supply.

FURUNO has taken its NMEA award-winning radar technology to the next level with Ultra High Definition Digital Radar. UHD™ offers crystal clear, noise-free target presentation with automatic real-time digital signal processing. Antenna rotation speed (24/36/48 rpm) is automatically shifted to the appropriate pulse length. Commercial-grade radar performance is now available in the ultimate MFD navigation suite.



Recommended Products

Technical Marine Support recommends these products based on Reliability and Performance: