Skip to content?



Our Products

Hatteland Series 1 Display 19 Inch

$4,209.00
PLEASE NOTE THAT THE AVERAGE LEAD TIME FOR HATTELAND PRODUCTS IS 4-6 WEEKS.

JH 19T14 STD 
Useful for automation applications in maritime markets and general industrial applications. Connections include DVI-I in, RGB in, AC in.
Tactile user controls. Wide range of mounting accessory solutions. Brightness is adjustable from 20% to 100%. AC power input.


Series 1 19 inch Data Sheet:

DATA SHEET

Manufacturer: Product: Type:

Hatteland Display AS 19.0 inch Industrial Display (STD) JH 19T14 STD-AA1-AAAA

Last Revised: Revision#:

26 May 2011 13

19.0 inch Industrial Display (STD) - Series 1

Features:

Hatteland Display is a leading marine display and computer manufacturer with dedication to knowledge, quality and value. The Series 1 Industrial Display (STD) is useful for automation applications in maritime markets and general industrial applications. It uses fewer cable connections than the previous generation, which increases reliability whilst reducing component costs.

- Brightness adjustable from 20% to 100%. - Connections include AC IN, DVI-I IN and RGB IN. - Tactile user controls. - Wide range of mounting accessory solutions.

FRONT VIEW

BOTTOM VIEW

TOP VIEW

SIDE VIEW

BACK VIEW

PANEL CUTOUT

Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm. For accurate measurements, check relevant DWG file.

This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine- readable form without the prior written consent of Hatteland Display AS. The products may not be copied or duplicated in any way.

Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway Tel: (+47) 4814 2200 - mail@hatteland-display.com - www.hatteland-display.com

1/2

PRODUCT SPECIFICATIONS - JH 19T14 STD-AA1-AAAA

Note: All specifications are subject to change without prior notice!

TFT Technology: Physical Considerations:

• 483 (W) x 444 (H) x 82 (D) mm - 19.02" (W) x 17.48" (H) x 3.23" (D) • Weight: 11.50 kg (approx)

• High Quality SHARP TFT • 19.0 inch viewable image size • Active Matrix, Thin Film Transistor (TFT) • MVA PremiumTM Technology

• DVI-I Signal IN • RGB Signal IN • AC Power IN

: 1 x 29p DVI Female (or as RGB IN with adapter) : 1 x 15p HD D-SUB (female) : 1 x Std IEC Inlet

TFT Characteristics:

Synchronisation:

Supported Signals:

Power Specifications:

Signal Terminals:

User Controls:

Environmental Considerations:

Available Accessories:

• Pixel Number • Pixel Pitch (RGB) • Response Time • Contrast Ratio • Light Intensity • Viewable Angle • Active Display Area • Max Colors

: 1280 x 1024 : 0.294 (H) x 0.294 (V) mm : 12 ms (typical), "black" to "white" : 900:1 (typical) : 300 cd/m2 (typical) : +/- 85 deg. (typical) (Up/Down/Left/Right) : 376.32 (H) x 301.056 (V) mm : 16.7 millions

On front bezel - Button control (IP66):

• Power On/Off and On Screen Display Menu (push button) • Brightness Control (up/down - push buttons) • Hotkeys (left/right - push buttons) • Mode Status Red/Green Illuminated LED-Ring Indicator

Sync Signal:

• Digital separate synchronisation • Composite synchronisation • Synchronisation on green. • Auto detects VGA -> SXGA, interlaced and non interlaced • Video Signal : Analog RGB 0,7Vp-p

: Input Impedance 75 Ohm

Synchronisation Range:

• Horizontal : 15,0 kHz to 91,1 kHz

• Vertical : 60 Hz* to 85 Hz * Recommended for optimum picture quality

• Operating

• Storage

• IP Rating

: Temperature -15 deg. C to +55 deg. C - Humidity up to 95% : Temperature -20 deg. C to +60 deg. C - Humidity up to 95%

: EN60529 (IP66) (Applies for flush mount)

Safety Considerations:

Even although the test conditions for units provide for a maximum operating temperature of 55°C, continuous operation of all electronic components should, if possible, take place at ambient temperatures of only 25°C. This is a necessary prerequisite for long life and low service costs.

• JH MMDBR STD-A1 = Bracket • JH 19BRD STD-A1 = Mounting Bracket EN60945 Tested • JH MMDRO STD-A1 = Rotary Bracket

• JH 19TSV STD-A1 • JH 19VED STD-A1 • JH 19TAP STD-A1 • JH 19TAP STD-B1 • JH 19TWC STD-B1 = Water Cover *Please see user manual for drawings/measurements.

= Sun Visor = Vesa Bracket

= 21" CRT Adapter frame = 21" CRT Custom Adapter frame

Resolutions:

• VGA • SVGA • XGA

: 640 x 480 (including 640 x 350) : 800 x 600 (including 720 x 400) : 1024 x 768

• SXGA * Recommended for optimum picture quality. (60 Hz only)

: 1280 x 1024*

Power Supply:

• 115&230VAC - 50/60Hz - JH 19T14 STD-AA1-AAAA

Power Consumption:

Operating : 100 W (max)

T E S T I N G / A P P R O V A L S & C E R T I FI C A T E S

EN60945 4th (IEC945 4th) DNV - Det Norske Veritas CCS - China Classification Society

This product have been tested / type approved by the following classification societies:

ClassNK - Nippon Kaiji Kyokai GL - Germanischer Lloyd ABS - American Bureau of Shipping BV - Bureau Veritas LRS - Lloyd's Register of Shipping

2/2





Recommended Products

Technical Marine Support recommends these products based on Reliability and Performance: