Skip to content?

Our Products

Hatteland Series 1 Display 22 Inch


JH 22T11 MMD Widescreen 
Connections include DVI-I in, RGB out, RGB in, IEC in, IEC out and USB I/O. Signal input/output can be increased with the HATTELAND® Multifunction Cable. 
It provides Picture-By-Picture (PBP) and Picture-In-Picture (PIP) functionality. Can be offered with Optical Bonding technology that mitigates screen misting. Brightness is adjustable from 0 to 100%. ECDIS Compliant. AC power input.

Series 1 22 Inch Data Sheet:


Manufacturer: Product: Type:


The Series 1 Maritime Multi Display Widescreen (MMD) uses fewer cable connections than the previous generation, which increases reliability whilst reducing component costs. All models can be delivered with either AC or DC input as standard and connections include DVI-I in, RGB out, RGB in, IEC inlet, IEC outlet and USB I/O.

Signal input/output options can be increased upon request by using the HATTELAND® Multifunction Connector, which allows the connection of many common signal types through a single cable connection, for common signals such as; Composite Video Input, Touch Screen and Serial Communication. The models provide Picture-By-Picture (PBP) and Picture-In-Picture (PIP) functionality. Aspect ratio is 16:10.

Further, all models and variations can be offered with Optical Bonding Technology that mitigates screen misting. By factory standards the unit is ECDIS Compliant.

Hatteland Display AS 22.0 inch Maritime Multi Display (MMD) JH 22T11 MMD-xxx-Axxx

Last Revised: 17 Mar 2011 Revision#: 18

22.0 inch Widescreen (MMD) - Series 1


Custom logo label: WxH 181.66 x 44.16mm / 7.15" x 1.74" R4.10 - 4 places






Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm. For accurate measurements, check relevant DWG file.

This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine- readable form without the prior written consent of Hatteland Display AS. The products may not be copied or duplicated in any way.

Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway Tel: (+47) 4814 2200 - -



Note: All specifications are subject to change without prior notice!

TFT Technology: Physical Considerations:

• High Quality AU Optronics TFT • 22.0 inch viewable image size. Widescreen, Aspect ratio 16:10. • Active Matrix, Thin Film Transistor (TFT) • RGB Vertical Stripe

TFT Characteristics:

• 572.50 (W) x 444.00 (H) x 82.00 (D) mm • 22.54" (W) x 17.48" (H) x 3.23" (D) • Weight: 14.50 kg (approx)

• Native Resolution • Pixel Pitch (RGB) • Response Time • Contrast Ratio

• Light Intensity • Viewable Angle • Active Display Area • Max Colors


Sync Signal:

: 1680 x 1050 : 0.282 (H) x 0.282 (V) mm : 20 ms (typical), "black" to "white" : 1000:1 (typical) : 300 cd/m2 (typical) : +/- 89 deg. (typical) (Up/Down/Left/Right) : 473.76 (H) x 296.1 (V) mm : 16.7 millions

Signal Terminals:

• DVI-I Signal IN • RGB Signal IN • RGB Signal OUT • Multifunction

• USB I/O • AC Power IN • AC Power OUT • DC Power IN

: 1 x 29p DVI Female (or as RGB IN with adapter) : 1 x 15p HD D-SUB (female) : 1 x 15p HD D-SUB (female) - Clone of RGB IN** : 1 x 160p D-SUB (female) - Also see table below

: 1 x TYPE B Conn. (female) Reserved for future use : 1 x Std IEC Inlet : 1 x Std IEC Outlet (5A Max) : 1 x 2p D-SUB Connector (male) - Amphenol FCC17

• Digital separate synchronisation • Composite synchronisation • Synchronisation on green. • Auto detects VGA -> WSXGA, interlaced and non interlaced • Video Signal : Analog RGB 0,7Vp-p

: Input Impedance 75 Ohm

Synchronisation Range:

• Horizontal : 15,0 kHz to 91,1 kHz • Vertical : 60 Hz* to 85 Hz * Recommended for optimum picture quality

Supported Signals:


Video Signals (with HATTELAND® Multifunction Cable):

• Interlaced NTSC and PAL/SECAM video • Composite video

**Tested at recommended resolutions. The RGB output signal is at same resolution and sync as the RGB input. The output is working even if the display unit is turned off, but power cable/supply must be connected/provided.

HATTELAND® Multifunction Cable:

The factory standard cable is delivered with the following connectors. Standard cable length is 30cm. Art: #1=VSD100692-4 / #2=VSD100692-3

#1 • COM1 • Composite Video IN

• COM1 #2 • Composite Video IN

• COM Touch

: 1 x 9p D-SUB (female) - RS232 : 3 x BNC (female)

: 1 x 9p D-SUB (female) - RS232 : 3 x BNC (female) : 1 x 9p D-SUB (female) - For touch screen

• VGA • SVGA • XGA • SXGA • UXGA • WSXGA * Recommended for optimum picture quality. (60 Hz only)

: 640 x 480 (including 640 x 350) : 800 x 600 (including 720 x 400) :1024x768 : 1280 x 1024

Customized cables are possible to support more built-in signals, like: RS-232, RS-485, RS-422/ RS-485, Buzzer, ON/OFF, Touch (RS-232 or PS/2), 1 x S-Video IN, 3 x Composite Video IN, Remote External User Controls, Alternative Keypad interface (i2c) and reserved for other signals. Custom cable lengths can be manufactured.

User Controls:

On front bezel - Keypad control (IP66) xxx-xxAx models:

• Power On/Off and On Screen Display Menu (push button) • Brightness Control (up/down - push buttons) • Hotkeys (left/right - push buttons) • Mode Status Red/Green Illuminated LED-Ring Indicator On front bezel - Potmeter control (IP66) xxx-xxBx models: • Power On/Off and On Screen Display Menu (push button)

• Brightness Control (rotary control) • Hotkeys (left/right - push buttons) • Mode Status Red/Green Illuminated LED-Ring Indicator • Speaker / Buzzer

Environmental Considerations:

• Operating : Temperature -15 deg. C to +55 deg. C - Humidity up to 95%

• Storage : Temperature -20 deg. C to +60 deg. C - Humidity up to 95%

• IP Rating : EN60529 (IP66) (Applies for flush mount) • Compass Safe Dist. : JH22T11MMD-xxx-xxxx - Std: 160cm Steering: 90cm Safety Considerations: Even although the test conditions for bridge units provide for a maximum operating temperature of 55°C, continuous operation of all electronic components should, if possible, take place at ambient temperatures of only 25°C. This is a necessary prerequisite for long life and low service costs.

Available Accessories:

• Cables = Custom Multifunction Cable to support more signals • JH 22BRD STD-A1= Mounting Bracket EN60945 Tested (See manual) • JH 22TBR STD-A1 = Mounting Bracket (See user manual) • JH 22VED STD-A1 = VESA Bracket (See user manual)

• JH 22TWC STD-A1= Water Cover (See user manual) • JH 22TSV STD-A1 = Sun Visor (See user manual) *Please see user manual for drawings/measurements.

Factory Options:

• Capacitive Touch Screen / Optical Bonding Technology • Color Calibrated models (ECDIS)

: 1600 x 1200 : 1680 x 1050*

Power Specifications:

Power Supply Options:

• 115&230VAC - 50/60Hz • 24 VDC

Power Consumption:


Typical Type Numbers:




- JH 22T11 MMD-Axx-xxxx - JH 22T11 MMD-Dxx-xxxx

- 85W (TYP) - 100W (MAX)

= Standard AC, Keypad controls only = AC/DC, Bonded, Capacitive Touch Screen* = Standard AC, Bonded, Potmeter Controls, Buzzer



For a full overview, please review our typenumber sheet found on our website:

*Note that all 22 inch with touch screens are by factory default delivered with bonding.

T E S T I N G / A P P R O V A L S & C E R T I FI C A T E S

This product have been tested / type approved by the following classification societies: IEC 60945 4th (EN 60945:2002) ClassNK - Nippon Kaiji Kyokai GL - Germanischer Lloyd

DNV - Det Norske Veritas ABS - American Bureau of Shipping BV - Bureau Veritas LRS - Lloyd's Register of Shipping


Recommended Products

Technical Marine Support recommends these products based on Reliability and Performance: